Toolbox Talk: Jobsite Housekeeping

Why it matters

Clutter causes trips, hides nails and hazards, blocks exits and feeds fires. Clean sites are safer and run better.

Talking points

• Clean as you go: pick up scrap and trash during the shift, not just at the end of it.
• Pull or bend nails: remove or bend over protruding nails in scrap lumber and form boards.
• Keep exits and aisles clear: don't block exits, fire extinguishers, electrical panels or emergency equipment.
• Stack materials safely: stack on level ground, keep stacks stable and at a height that won't tip.
• Use the right containers: put trash and debris in bins or chutes and don't throw materials from heights.
• Control fire hazards: store oily rags in metal cans with lids, and keep flammable materials away from ignition sources.

Ask the crew

1. What is the messiest part of our work area right now?
2. Where will we put the scrap and trash today?
3. Is anything blocking an exit, a path or equipment we might need?

Before we start work today: Assign who will clean up each area, and set a time to do it before the end of the shift.

Who attended

#	Name (print)	Signature	Company / crew
1
2
3
4
5
6
7
8
9

Source: OSHA 1926.25: Housekeeping. General safety information only, not legal advice; follow your employer’s program, the manufacturer’s instructions and current regulations. Keep signed sheets with your safety records. FirstDayTraining.com · Todd Allyn Media Inc.